4S Graphics

Banner PVC Film - Anti Curl

SolviT Banner PVC Film 8 Mil (Satin) is a tear-resistant polyvinyl chloride film for eco-solvent and solvent printing. The Anti-Curl feature of this product makes it suitable for spring banners, roll-up & stand banners and Pop-up Banners.

Product Specifications

• Base: PVC Film
• Thickness: 8 mil (200 microns)
• Surface Finish: White Satin
• Ink Compatibility: Most Eco-Solvent and Solvent based Inks
• Ink Limit: Up to 350%
• Shelf-Life: One year from the date of manufacture when stored in original packing at 10-30°C and 65% RH (± 5%).
• Speciality: Anti Curl Feature

Compatibility

Compatible with original solvent and eco-solvent inks from printers of HP series, ColorSpan series, Seiko series, Roland series, Mutoh series, Mimaki JV series and Oce.

Usage Instructions

• Pre test the compatibility of the inks with the media for the design application, before commencing actual production.
• To achieve the best possible print quality, please make sure that the correct ICC profiles, color calibration are used.
• While printing, care must be taken to modify the print file to suit the ink limit of the media.
• The media should be printed within the specified ink limit. Exceeding the ink limit can lead to longer drying time, bleeding, lower resolution and poor adhesion of the lamination film.
• Printed media should be thoroughly dried before rolling-up for transport to avoid smearing.
• Printed media should be protected by a cold, pressure sensitive lamination film. The prints should be thoroughly dried before lamination. The lamination film must be checked for compatibility with the media.
• When not in use, the media should be stored in its original packing.

Durability in outdoor conditions

• The durability of the printed image is dependent on the fading characteristics of the inks used.
• We recommend usage of original inks. Please consult the ink manufacturer and printer manufacturer for technical advice on the suitable inks.
• If the printed graphics are likely to be exposed to corrosive liquids, smoke, fumes or a highly polluted atmosphere or if there is a likelihood of scratching or friction while mounting on surfaces or cleaning after mounting, it is strongly recommended that the prints are laminated with a cold, pressure sensitive vinyl lamination film.

Downloads

Product information catalog (296KB)